If the value for that illuminator is set back to 0, that light will switch back off, and the first light will switch back on. If both illuminator values are set to "1", the microscope will deactivate the first light and activate the most recent assigned light. Illuminator_2 0x00980926 (bool) : default=0 value=0 flags=updateįor at least this version (revision 2) of the QX5, illuminator_1 refers to the scope/upper light, and illuminator_2 refers to the stage/lower light, opposite of the QX3 behavior. Illuminator_1 0x00980925 (bool) : default=0 value=0 flags=update Sharpness 0x0098091b (int) : min=0 max=2 step=1 default=1 value=1 flags=slider Gamma 0x00980910 (int) : min=0 max=3 step=1 default=1 value=1 flags=slider
#QX5 MICROSCOPE DRIVER FULL#
Quantization : Default (maps to Full Range)īrightness 0x00980900 (int) : min=0 max=30 step=1 default=15 value=15 flags=slider YCbCr/HSV Encoding: Default (maps to ITU-R 601) Transfer Function : Default (maps to sRGB) QX5 v4l2-ctl device information (device "video0" because there is no internal webcam, otherwise would be "video1"):
#QX5 MICROSCOPE DRIVER DRIVER#
usbcore: registered new interface driver mars
videodev: Linux video capture interface: v2.00 usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 1-1.3: New USB device found, idVendor=093a, idProduct=050f, bcdDevice= 1.00 usb 1-1.3: new full-speed USB device number 4 using ehci-pci In Linux version 4.19.0-5-amd64 (Debian 4.19.37-5), the QX3 and QX5 are both recognized and functional after installing v4l-utils and vlc. STMicroelectronics Imaging Division (VLSI Vision) While the QX3 maxpower is reported as 500mA, the QX5 (revision 2) maxpower is reported as 100mA. QX5 revision 2 identifies itself as 093a:050f. There were at least two versions of the QX5 produced. The QX5 replaces the QX3's incandescent bulbs with LEDs.
Both devices have an upper portion that is removable from the base while in operation. The QX5 is an improved version of the QX3 USB microscope.
0 kommentar(er)
